Guides
Summer heat and SAWS water restrictions
San Antonio's triple-digit summers, the Edwards Aquifer stages that set watering rules and how to find your assigned watering day with SAWS.
San Antonio's weather has two defining features in summer: heat that holds from late spring into October, and a water supply that depends on rain falling over a limestone aquifer. The two meet in the watering rules published by the San Antonio Water System, or SAWS. Those rules change as the aquifer level changes, so the first rule of summer here is to check the current stage rather than rely on what you remember from last year.
How hot it gets
The National Weather Service's 1991 to 2020 normals for the San Antonio record give an average July high of 94.9 degrees and an August high of 96.0, with average lows near 75. Those are averages; the hot afternoons run well past them. The record highs include 107 degrees in July (2022 and 2020) and 110 in August (2011). Triple-digit afternoons are a regular feature of July and August, and the lows often stay in the mid-70s overnight, which gives the body little relief.
Rain does not offset the heat. The July normal is 2.41 inches and August 2.15. The city's driest stretch on record ran 63 days in 1993 with less than 0.01 inch of rain, and 53 days ran from September 6 to October 28, 2024. Dry spells of that length are what make water restrictions a fact of life.
Heat safety
Plan outdoor work and exercise for early morning or after sunset. Drink water before you are thirsty. Wear light clothing, and check on older neighbors and relatives who do not use air conditioning. Never leave a child or a pet in a parked car, even briefly. Symptoms of heat exhaustion include heavy sweating, dizziness, nausea and cramps; move the person to a cool place and give water. Confusion, a very high temperature or loss of consciousness is an emergency, so call 911.
If your power fails in the heat, the numbers in Emergency preparedness and signing up for AlertSA apply. CPS Energy's emergency line is 210-353-HELP.
Why the aquifer sets the rules
San Antonio draws its water from the Edwards Aquifer, according to SAWS. The aquifer rises and falls with rainfall, and when it falls below set levels, restrictions begin. The stages are named in numbers, and a higher number means a drier aquifer and tighter limits. The first regulations on the Edwards Aquifer recharge zone were adopted in 1995.
SAWS also reduces dependence on the aquifer with other sources. According to its site, it operates a brackish groundwater desalination plant with a capacity of 12 million gallons a day and a large recycled water system that supplies irrigation and industrial users. It maintains about 13,000 miles of water and sewer mains.
What Stage 3 looked like in November 2026
On November 16, 2026, the SAWS home page showed Stage 3 rules in effect. Under those rules, watering a landscape with a sprinkler or irrigation system was allowed once a week on an assigned day, in two windows: 5 a.m. to 10 a.m. and 9 p.m. to midnight. Treat that description as a snapshot. Stages change, and the specific hours, fines and exemptions are set by SAWS and its ordinances. The SAWS site and its customer service line list the stage in effect on any given day.
Common features of restriction stages in general: limits on hose-end sprinklers, a ban on washing driveways and sidewalks, limits on car washing at home and rules on filling pools. The SAWS site spells out what each stage permits.
How to find your assigned watering day
SAWS assigns each address a watering day, and the utility is the only place to confirm yours. The reliable steps are:
- Go to saws.org and look for the watering schedule or the water-restriction page.
- Enter your address or follow the lookup that shows your day.
- If you are in an apartment, ask your property manager; landscape watering is often done by the property.
- If you are unsure, call SAWS customer service at 210-704-SAWS (210-704-7297). Customer service is open Monday through Friday from 8 to 5, and water and sewer emergencies are handled 24 hours a day.
Write the day and the two time windows on a card by the irrigation controller. Many people set the controller once and forget it, then run afoul of the rules when a stage changes. After a rain, the clock matters: some stages allow watering only at assigned times even when the grass looks dry.
Ways to cut use without losing the yard
- Water in the early morning window, when evaporation is lowest. Midday sprinkling wastes much of the water.
- Water less often but longer, so moisture reaches the roots; a deep soak once a week beats a daily sprinkle.
- Mulch beds with a few inches of organic material.
- Fix leaks. A running toilet or a dripping irrigation head can waste more water in a day than a household uses on dishes.
- Choose native and adapted plants. The Hill Country limestone and clay soils reward plants that are suited to drought.
Reporting a water problem
A broken main or a flooding sewer is an emergency for SAWS, which takes calls at 210-704-SAWS around the clock. Customers who see water running down a street from a broken sprinkler or main can report it to SAWS; 3-1-1 handles other city services. Setting up service when you move is covered in how to set up electric, gas, water and trash service.
SAWS also announced a four-year rate plan approved by the city council in October 2026, according to the city's news page; the SAWS site carries the schedule and what it means for a household bill.