Blog
The Bexar County floodplain: maps, fees and who handles what
How to find flood risk in Bexar County, which agencies handle what, and what the city's storm water fee pays for, with a worked fee example.
Ask any Bexar County homeowner whether the house floods and the honest answer may be "depends on the storm." The map and the mailing address do not always agree. A house can sit outside the official floodplain and still take on water in a heavy rain, and a house inside it can go decades dry. The map is a regulatory tool, drawn from engineering studies for one purpose: deciding where building rules and flood insurance requirements apply. What follows is the system as the City of San Antonio's Public Works Department describes it, and where the county and the river authority fit.
One caution up front. The county's own permit rules are not spelled out in detail here; the specifics below come from the city's Public Works pages as read in November 2026 and from other published references. Anyone building or buying near a creek should ask the county and the city directly.
Why the creeks matter here
The weather record is why drainage is a public job in this town. Average annual precipitation is 32.38 inches according to NOAA normals, but the National Weather Service's record, which runs from July 1885 to July 2026, includes a highest daily rainfall of 11.26 inches on October 17, 1998, and a wettest month of 18.07 inches in October 1998. The flood of September 9 and 10, 1921 put downtown under water and killed at least 51 people. The Olmos Dam was finished in 1926 and a river bypass channel in 1930. The flood of September 9-10, 1921, Olmos Dam and the river bypass: how San Antonio tamed its river and The October 1998 flood tell those stories.
The same creeks are the corridors for the city's greenway trails, covered in The Linear Creekway Parks. What the history shows is that flash flooding is the hazard this area is known for, and the rules about where to build are the long-term answer to it.
The map: FEMA flood insurance rate maps
The official map is the Flood Insurance Rate Map (FIRM). FEMA describes it as the official map of a community on which it has marked the Special Flood Hazard Areas, and which also shows base flood elevations and the risk premium zones that apply. The city's Public Works page says FEMA's Digital Flood Insurance Rate Maps (DFIRM) are available through FEMA's Flood Maps portal, msc.fema.gov.
Two things to keep in mind when reading one:
- It shows a regulatory flood, not the worst flood. The map marks areas FEMA delineates as special flood hazard areas, the ones the National Flood Insurance Program's rules treat as high-risk. Water can reach other places.
- It changes. FEMA revises maps, and the portal is where to check the current one.
For any particular property's floodplain status, the FEMA portal is the tool, and the city lists related ones.
What the city offers for looking up risk
San Antonio's Public Works Department, whose record is in Public Works Department, maintains the city's storm water infrastructure, runs drainage improvement projects, reviews storm water plans for development and oversees the federal and state permit for its storm sewer system. Its "Know Your Flood Risk" page lists tools:
- Contours and Hydrology GIS map. One-foot contour lines and hydrologic features, including low water crossings.
- Storm Water Funded Projects map. Where city drainage projects are funded.
- USGS water data dashboard. Stream gage height, discharge and precipitation.
- Bexar County HALT Low Water Crossing map. Current flood updates and emergency road closures, provided by the county.
- Elevation certificates. A form is linked on the page; to get one for a property address, call 210-206-8433.
- Site visits. The same number covers one-on-one visits about property protection, retrofitting and drainage improvements.
- Drainage complaints. Call 3-1-1 or 210-207-6000, or use the 311 online portal.
The page also lists the National Flood Insurance Program (NFIP), the federal program that lets property owners and renters buy flood insurance and lets the city enforce floodplain management standards, and the Community Rating System (CRS), a voluntary program that recognizes local practices going beyond the NFIP's minimums. It points to a site on flood insurance facts and preparedness, safloodsafe.com. A homeowner's insurance policy usually does not cover flood damage on its own; the policy's terms and the insurer settle the question.
Who handles what
Three bodies share flood control in this county, and residents often cannot tell which to call.
- The City of San Antonio (Public Works) maintains city storm water infrastructure, reviews development plans and oversees the storm sewer permit.
- Bexar County provides flood updates and emergency road closure information through the HALT map. The county's property tax bill also carries a line for the Road and Flood Control Fund, which appears among the taxing units on the single bill the Tax Assessor-Collector sends; see Reading a Bexar County property tax bill.
- Bexar Regional Watershed Management (BRWM) is a partnership of the Bexar County Commissioners Court, the City and the San Antonio River Authority. It coordinates flood control and watershed management. The San Antonio River Authority provides a data and modeling repository and river health information.
As a practical matter, a drainage problem on a city street is a 3-1-1 report; a question about the county's rules in an unincorporated area is a call to the county; and a question about regional modeling is for the river authority. The Commissioners Court itself, which sets the county budget and votes on projects, is covered in What Bexar County's five-member Commissioners Court controls and the county's record in Bexar County Commissioners Court.
The storm water fee
Drainage costs money, and the city bills for it. The Storm Water Utility Fee pays for drainage services run by Public Works: capital and maintenance costs for local drainage projects and operations tied to the city's storm sewer permit. The city's examples are street sweeping, channel mowing and restoration, drainage infrastructure maintenance and natural creekway debris removal. By rule, the fee can only fund services that support the permit requirements and storm water operations.
It is billed monthly on the San Antonio Water System bill, where it shows up as the "Stormwater Fee," with SAWS acting as the city's billing agent. The fee rests on impervious cover, meaning hard surfaces such as roofs and driveways that do not absorb water, under a structure the City Council adopted in September 2015. Before that it was based on lot size and land use.
The city lists monthly residential rates, revised in FY 2020, by the amount of impervious area:
| Residential tier | Impervious area | Monthly fee |
|---|---|---|
| Tier 1 | up to 2,750 square feet | $3.75 |
| Tier 2 | 2,751 to 4,220 square feet | $4.94 |
| Tier 3 | more than 4,220 square feet | $10.45 |
Non-residential properties pay a base fee of $67.30 a month plus a rate per 1,000 square feet of impervious area that depends on the percent of the lot covered.
A worked example
Say a home has 3,000 square feet of roof, driveway and paving combined. That lands in Tier 2, at $4.94 a month, or 12 x $4.94 = $59.28 over a year. A neighbor in Tier 1 would pay 12 x $3.75 = $45.00 a year, and a household in Tier 3 would pay 12 x $10.45 = $125.40. The example is hypothetical, and the rates are those the city lists as revised in FY 2020; check the city for the current schedule.
The city also notes exemptions, among them property with a wholly sufficient privately owned drainage system, property kept in its natural state, a subdivision lot until a certificate of occupancy is issued, state agency and higher education property, and city streets and drainage facilities. Non-residential owners who maintain certain best management practice or low-impact development features might receive a credit of up to 30 percent off the impervious fee, but Public Works will recommend that incentive to council, so confirm it is active before anyone relies on it.
Permits: ask locally
The headline promised maps and permits, so here is where the general answer stops. The city's flood-risk page does not cover floodplain permits; it notes only that Public Works reviews residential and commercial storm water development plans, and the city's Development Services department handles building permits (see How to get a building permit through BuildSA). The permit rules for unincorporated areas belong to the county. In general terms, communities that take part in the NFIP enforce floodplain management standards through a local permit process, which is what the city means when it says the program lets it enforce those standards. For a particular lot, the answer comes from the local permitting office and not from a general article.
Practical steps
- Check the FEMA map for the address at msc.fema.gov, and the city's GIS tools.
- Ask about insurance before a storm, not after. Flood insurance is separate from a standard homeowner's policy; ask the insurer.
- Get an elevation certificate if one is needed, by calling 210-206-8433.
- Report drainage problems through 3-1-1.
- Know the crossings. Use the HALT map and never drive into water. The Fire Department publishes steps to follow if caught in a flash flood; the guide is Flash flood safety in San Antonio.
- Sign up for alerts through the city's emergency program, AlertSA.
The county's floodplain is a map, a set of rules and a set of agencies, each with a different job. A resident who knows which does what spends less time on hold and more time ready.