Blog

I-35, I-10, I-37 and US 90: how the downtown freeways work

Four highways meet around downtown San Antonio and trade lanes, names and double decks. How the box fits together and how to check it before you drive.

From the River Walk you would never guess it, but downtown San Antonio sits inside a box of freeways. Interstate 35 runs along the west and north sides, Interstate 10 shares the west side and then peels away, US 90 rides with I-10 along the south, and Interstate 37 climbs up from the south to end at the northeast corner. Almost every trip to the Alamo, the River Walk, the Alamodome or the Tower of the Americas touches one of those roads. Learn which is which and the signs on the way in stop feeling like a pop quiz.

The box, side by side

Reference descriptions of the routes agree on the layout. Start at the southwest corner of downtown. There I-35, coming up from the south, meets I-10, US 87 and US 90 in a multi-level interchange. West of downtown I-35 and I-10 run together; the two routes share one roadway along the west side of the center and part company again at the interchanges at the north and south ends of that stretch. To squeeze the traffic into a narrow corridor, the shared roadway is split into two levels. The upper deck carries express traffic and the lower deck carries local traffic, and the levels rejoin near the northwest corner, where I-10 and US 87 leave toward the northwest.

I-35 then curves around the northwest corner of downtown and heads east along the north side. At the northeast corner it meets the northern end of I-37, while US 281 carries on north as its own freeway, the route that leads toward San Antonio International Airport.

The south side of the box belongs to I-10 and US 90. They run together there, and a published description gives that stretch a name, the Jose Lopez Freeway, after a Medal of Honor recipient. On the east side, I-37 comes in from the south and joins the system roughly two miles east of the I-35 and I-10 interchange, in a four-level interchange with I-10. The upshot, as the references put it, is that I-10, I-35 and I-37 form a freeway loop around downtown.

A quick way to hold the layout in your head:

  • West side: I-35 and I-10 together, in a two-level corridor.
  • North side: I-35, running east toward its meeting with I-37 and US 281.
  • East side: I-37 arriving from the south and ending at I-35.
  • South side: I-10 with US 90, the Jose Lopez Freeway.

Three routes with three jobs

I-35 was built to cross the continent. The descriptions list it as the PanAm Expressway in San Antonio. It comes in from the southwest, crosses Loop 410 near that loop's southwest point, widens from four lanes to between six and eight after Spur 422, and then becomes the downtown box's west and north legs. After it leaves downtown it curves northeast, merges with the eastern leg of Loop 410 in a triangular interchange, and runs north together with Loop 410 until that loop splits off again toward the north. Trucks are barred from the far left lane in both directions in Bexar, Guadalupe and Comal counties.

I-10 is the commuter's road. A published traffic summary calls it the busiest freeway in the city, with nearly 200,000 vehicles on an average day. On the northwest side it is the McDermott Freeway, named for a former dean of the U.S. Air Force Academy who later led USAA. That is the corridor from Loop 1604 into downtown, past USAA's campus, Valero, UT San Antonio and Six Flags Fiesta Texas. East of downtown the route is called the 90th Infantry Division Memorial Highway. Two bits of its history are worth knowing. A short segment from Culebra Road to Woodlawn Avenue opened in 1949, signed as US 87, and is described as the city's first freeway. And during the 1980s the northwest approach to downtown was rebuilt as a double-deck, expanding it to five lanes in each direction.

I-37 is the road to the coast. It runs about 143 miles from Corpus Christi to San Antonio, was first designated in 1959, and was complete by 1981. Its San Antonio end was built in the 1960s and finished in 1972. Two segments are named: the Lucian Adams Freeway from Loop 410 to I-10, and the Staff Sergeant William J. Bordelon Freeway from I-10 to I-35. I-37 passes close to the Alamodome, the Tower of the Americas, the River Walk and the Alamo, which makes it the most direct road to those landmarks from the south.

How big a project a freeway was

The scale of the 1960s construction is easy to forget. According to the published histories, the contract for the I-10 interchange with I-37 cost about $11 million, at the time the largest single contract in the history of the state highway commission. The I-35 interchange with I-37, also about $11 million, was described as the largest highway project in state history when construction began in 1969. The stack interchange that closed the I-37 junction was finished in 1972 and, in the words of those histories, completed the freeway loop around downtown.

That span between 1969 and 1972 is when the box took its final shape. The city's own growth had set the pressure. The population stood at 408,442 in 1950 and 587,718 in 1960 (the Texas State Historical Association's census table), an increase of 179,276 people, or about 44 percent, in one decade. In those years the city crossed from fewer than half a million residents to more than half a million, and the box of freeways went up in the same years.

What the freeways did and did not do for downtown

A freeway loop is a trade. It brings cars in fast and takes them out fast, and it also draws a hard line on the ground where it lands. How that line fell on individual neighborhoods on the near east and near west sides is a longer story than this one, and the effects differ block by block, so a single verdict would flatten them. The neighborhood histories in Downtown San Antonio and the East Side stories in Cherry Street and Ellis Alley: Black San Antonio on the East Side are where individual districts remember the construction years.

What can be said safely is that the box is still the city's main traffic machine and that it is still being worked on. Farther out, the Loop 1604 interchange with I-10 is being rebuilt as a five-level interchange, and the I-35 work from Loop 410 North to FM 3009 is a 2022 to 2027 project. Those projects are covered in The five-level 1604 and I-10 interchange and its eight flyovers and The Loop 1604 North Expansion, segment by segment, and the two rings that circle the city are compared in Two rings: Loop 410 and Loop 1604.

Checking before you go

All of the downtown freeways are state highways, so the agency that closes and reopens them is the Texas Department of Transportation, not the city. TxDOT's San Antonio District is at 4615 NW Loop 410 and takes calls at 210-615-1110. The live-conditions site is DriveTexas, at drivetexas.org, which shows closures, work zones and incidents on state roads. The city's own streets, the ones that run under and beside the freeways, are the Public Works Department's job, and a pothole or signal problem is a 3-1-1 call, as How to use 311 in San Antonio explains. How to check DriveTexas before a San Antonio drive walks through using the site step by step.

A short routine for a trip into downtown:

  1. Check DriveTexas before you leave, especially if your route includes the I-35 and I-10 shared stretch, where a single closure ripples out.
  2. Know your exit side. A downtown address on the south side is usually closer to the I-10 and US 90 leg; one near the Alamodome is closer to I-37.
  3. Plan the last mile. The freeway gets you to the box; the final blocks are city streets, with one-way pairs and parking structures.
  4. Consider the bus. VIA Metropolitan Transit runs service into the downtown hub, and its fares and passes are in Riding VIA: fares, passes and transfers.

Why the double deck matters to a driver

The two-level corridors are what newcomers find hardest to read. Where I-10 and I-35 share the west side, the upper level carries express traffic, and a driver who wants a downtown exit has to be in the lane that connects to the lower, local deck early. Signs are posted in advance, but the lanes that split are the ones where people change their minds at the last second.

The published descriptions of I-10 give the dimensions: the upper level has three lanes in each direction and the lower level has two lanes in each direction. That is five lanes each way in total, which matches the five-lane count the 1980s rebuild produced. For a driver, the practical point is to read the overhead signs a mile or more ahead and get into the lane for your deck early. These descriptions are general, and the signs on the day are the authority.

Reading the numbers

Freeway signs carry numbers that mean different things:

  • Interstates (I-10, I-35, I-37) are the blue-and-red shield routes, funded by the federal highway program and managed by the state.
  • US routes (US 90, US 87, US 281) are older national routes that ride the freeways in places. US 87 and US 90 both overlap with the interstates in the downtown box.
  • Loops (Loop 410 and Loop 1604) are state highways that circle the city. Loop 410 is about 53 miles and Loop 1604 is about 96.

That overlap explains the panels that list two or three route numbers at once: the road is one road, with several names.

The freeways on the box are older than most of the people who use them, and they are still being rebuilt a piece at a time. For the current state of the work, trust TxDOT and DriveTexas, not a map you printed last year.

Related city government

Related guides

Related neighborhoods

Latest on this topic